VENT-SURE KILN VENT SYSTEM
Vacuum in the Duct makes this the Safest
Downdraft Kiln Vent Available

WALL MOUNTED VENT BLOWER
The vent blower motor is mounted on the wall. This keeps the heat of the kiln away from the motor (for long motor life) and keeps the
motor vibration away from the kiln (which can cause ware to move, damage to the kiln, and misfiring of cones on a Dawson Kiln Sitter).

VACUUM IS SAFER THAN PRESSURE
The vent tubing is kept under vacuum instead of pressure (unlike competitive brands).
This insures that any leak in the tubing does not blow hot fumes into your room.

EXTERNAL VENTING IS BETTER
External venting is safer and surer than venting to the inside of your kiln room with a filter.

LARGE CAPACITY
The blower vents up to 130 CFM (cubic feet per minute). This will handle up to a 20 cubic foot kiln (and usually larger). 
More than one vent can be attached to a kiln. Only 1.37 amps.

ADJUSTABLE VENT CONTROL
A vacuum bypass on the kiln bypass/collection box adjusts the amount of venting from the system. 
Don’t waste heat and energy by venting more than you need.
Adjust vent to kiln size.

15 FEET OF FLEXIBLE ALUMINUM DUCT
15 feet of flexible expandable aluminum 3" diameter duct is included along with necessary hose clamps. 
Longer lengths or lengths of 3" stove pipe can be used as well. 
Length can be as great as 60 feet horizontal or vertical with up to four 90 degree bends.

Price £289 plus VAT

Above is a Vent-Sure System shown attached to the stand of a Jupiter or Easy-Fire kiln.